top of page
Search
Fahad Gohar
Jul 16, 20203 min read
#Drilling Processes & #Well Completion
The Oil Drilling Process The crew sets up the rig and starts the drilling operations. First, from the starter hole, the team drills a...
Fahad Gohar
Jul 7, 20202 min read
Drill_Stem_Test Operation (DST)
Well tests conducted with thedrillstringstill in the hole. Often referred to as DST, these tests are usually conducted with a downhole...
Fahad Gohar
Jul 7, 20202 min read
Hydraulic_Fracturing_Process
Hydraulic Fracturing Process Hydraulic fracturing happens in small sections called stages. It starts at the end of the wellbore and moves...
Fahad Gohar
Apr 13, 20202 min read
#Acceptance_Quality_Limit
What Is Acceptable Quality Level (AQL)? The acceptable quality limit (AQL) is a measure applied to products and defined in ISO 2859-1 as...
Fahad Gohar
Apr 8, 20202 min read
#Equipment_Overall_#Effeciency
Equipment_Overall_Efficiency
Fahad Gohar
Feb 15, 20202 min read
#Quality_Function_Deployment #QFD
Quality Function Deployment, or QFD, is a model for product development and production popularized in Japan in the 1960’s. Quality...
Fahad Gohar
Feb 15, 20202 min read
Basic Tools in #Quality_Control
7 Management Tools For Quality Control 1. Flowchart Flowcharts are also used to document work process flows. This tool is used when...
Fahad Gohar
Oct 17, 20193 min read
#IATF_16949:2016
The IATF 16949 structure is split into 11 sections. The first three are introductory, with the last seven containing the requirements for...
Fahad Gohar
Oct 17, 20193 min read
Seven_Essential_Quality_Tools
What are the 7 QC Tools? The 7 QC tools as defined by the American Society for Quality (ASQ) and accepted throughout the quality...
Fahad Gohar
Sep 29, 20193 min read
#Process_Capability
In every process, there exists a certain amount of variation. Variation in a process cannot be eliminated, but it can be measured,...
Fahad Gohar
Sep 24, 20192 min read
#Measurement_System_Analysis
Measurement Systems Analysis Fundamentals Determine the number of appraisers, number of sample parts, and the number of repeat readings....
Fahad Gohar
Sep 19, 20192 min read
#Failure_Modes_and_Effects_Analysis (FMEA)
Failure Modes and Effects Analysis (FMEA) is methodology for analyzing potential reliability problems early in the development cycle...
Fahad Gohar
Sep 12, 20193 min read
#Lean #Six_Sigma #5S
5S represents Japanese words that describe the steps of a workplace organization process. English equivalent words are shown in...
Fahad Gohar
Sep 12, 20193 min read
#Sulfuric #Acid #Hazards
Other names or identifying information for sulfuric acid: CAS Registry No.: 7664-93-9 Other Names: Battery acid, sulphuric acid Main...
Fahad Gohar
Aug 28, 20193 min read
Lean Six Sigma
Lean Six Sigma is the system preferred by businesses around the world to streamline, improve, and optimize any and every aspect of their...
Fahad Gohar
Aug 26, 20192 min read
Excavation in Construction/Trenching
Working in an excavation is one of the most hazardous jobs in the construction industry. Most excavation accidents are the result of...
Fahad Gohar
Mar 23, 20192 min read
#Beryllium #Hazards
According to NIOSH "workers exposed to particles, fumes, mists and solutions from beryllium-containing materials may develop beryllium...
Fahad Gohar
Mar 17, 20193 min read
#Heat_Stress
Heat stress can lead to heat stroke, heat exhaustion, fainting, cramps and rashes. High temperatures can also lead to injuries among...
bottom of page